Latitude 5490 Owner’s Manual

Installing the keyboard

1. Hold the keyboard and route the keyboard cable and the keyboard backlight cables through the palmrest in the system.
2. Align the keyboard with the screw holders on the system.
3. Replace the five (M2x2.5) screws to secure the keyboard to the system.
4. Turn the system over and connect the keyboard cable and the keyboard backlight cable to the connector in the system.
   NOTE When reinstalling the chassis frame ensure the keyboard cables are NOT under the lattice , but run through the opening in the frame before connecting them to system board.
5. Install the:
   1. keyboard lattice
   2. battery
   3. base cover
6. Follow the procedure in After working inside your computer.